SUPPLIER JOCKEY FIRE PUMP

JOCKEY FIRE PUMP

Spesifikasi Jockey Fire Pump Standar NFPA 20 Versa

Pompa Pemadam Kebakaran

Jockey Fire Pump Versa 

Pump : VERSA
Type : Vertical Multistage Inline Pump
Model : VS 4 – 21
Capacity : 25 USGpm (= 5.7 M³/HR)
T. Head : 130M
Motor : Versa, 4kW/5.5Hp/2900Rpm/380V/50Hz/
3Phase
Controller : Versa, NFPA 20 std
No. DESCRIPTION BRAND UNIT Q`TY
Pump complete with motor driven and 1 set
controller
Diameter Suction / Discharge Pump :1¼”/1¼”

Jockey Fire Pump 1 unit
Pump : VERSA
Type : Vertical Centrifugal Multistage Pump
Model : VS 16 – 14
Capacity : 50 USGpm (=11.4 M3/Hr)
T. Head : 180 M
Motor : IEC Std, TEFC, Class F, IP 55,
15kW/20Hp/2900Rpm/380V/50Hz/3Phase.
Controller : VERSA, NFPA 20 Std
Pump complete with motor Driven and 1 set controller.
Diameter Suction / Discharge Pump : 2”/2”

JUAL ROTARI LOPE PUMP

JUAL ROTARI LOPE PUMP ( FULL STAINLESS SS-316 )

ROTARY LOBE PUMP ( FULL SS-316)

Our Hygienic Rotary Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary & hygienic qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place ( CIP/ SIP) characteristics. All wetted parts are made of SS-316.

Rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

SPESIFIKASI POMPA :
1. Kapasitas hingga 1770 LPM
2. Tekanan hingga 7 Bar
3. Ukuran - 1 " sampai 4 "
4. Pompa dengan steam jaket juga tersedia

BAHAN KONSTRUKSI :
1. Pump chamber - SS-316
2. Lobe - SS-316
3. Top cover - SS-316
4. Mechanical seal - SIC vs SIC with Viton elastomer
5. Shaft - SS-316
6. Casing - Cast iron
7. Back cover - Cast iron
8. Gear - EN-24 ( AISI-4340) Alloy s

Untuk pemesanan pembelian unit pompa silahkan hub

SUPPLIER DIESEL HYDRANT FAWDE

DIESEL HYDRANT FAWDE

Spesifikasi Diesel Hydrant Fawde :

Untuk lebih detail mengenai spesifikasi diesel pump untuk fire hydrant yang disarankan supaya instalasi fire hydrant dapat berjalan dengan baik antara lain:

Type pompa : Centrifugal End Suction
Kapasitas : 2850 L/men
Head pompa : 85 m
Putaran pompa : 2.900 rpm
Type Engine : Diesel
Putaran : 2.900 rpm
Sistem Coupling : Direct Connected
Daya : lebih kurang 90 HP
Jumlah : 1 (satu) unit
Power : Accu 24 volt, 80 Amp, 2 buah type maintenance free, Lengkap dengan Panel Kontrol Engine Fire Pump

SUPPLIER POMPA PARAGON

POMPA PARAGON

Harga sewaktu - waktu dapat berubah

sesuai dengan mata uang USD dan EURO saat ini.

Data penawaran di bawah ini

sesuai dengan spesifikasi kebutuhan masing-masing industri

Untuk proyek, data pompa dan harga terbaru silahkan hubungi kami

Telpon : 021 2753 3825

PARAGON PUMP ( POMPA PARAGON )

FIRE  PUMP : Merk         : PARAGON Type         : PS 125X80X210 Capasitas  : 750 GPM Head         : 50 M Power       : 75 KW/ 380 V/ 3 Phase/ 50 HZ/ 2900 Rpm Price         : USD 9.570,-/ Unit C/W Motor Electrim, Coupling, Base Plate          FIRE  PUMP : Merk         : PARAGON Type         : PS 125X80X210 Capasitas  : 750 GPM Head         : 50 M Power       : 75 KW/ 380 V/ 3 Phase/ 50 HZ/ 2900 Rpm Price         : USD 9.570,-/ Unit C/W Motor Electrim, Coupling, Base Plate           Merk         : PARAGON Type         : PS 125X80X210 Capasitas  : 750 GPM Head         : 50 M Power       : 116 KW/ 2900 Rpm Price         : USD 28.800,-/ Unit C/W Engine, Coupling, Base Plate    Untuk Penawaran Tipe Lainnya Silahkan Hubungi Kami

SUPPLIER SAER ITALY : Vertical Multistage Pump

SAER ITALY : Vertical Multistage Pump

MODEL : MK, MKX – MULTI-STAGE VERTICAL PUMPS
BRAND : SAER PUMP EX ITALY

Compact, multi-stage vertical pumps, suitable for lifting plants with or without autoclave, irrigation and washing systems and all other applications where high pressure is required. These pumps are configured with a bearing designed to support the axial thrust of the pump and allow coupling to any other standardised motor. Dual wear ring and bushes to guarantee maximum reliability.

Available the close-coupled version MKM as well, with reduced overall dimensions and reduced costs.

Materials : Cast Iron, Stainless Steel.
MAXIMUM FLOW RATE  : 110 m3/h
MAXIMUM HEAD             : 394 M
MAXIMUM POWER          : 55 kW

Supplier Centrifugal End Suction Pump : Model - NCB Ex. Italy

Centrifugal End Suction Pump : Model - NCB Ex. Italy

Model : NCB – CENTRIFUGAL PUMPS END SUCTION

Centrifugal pump meeting EN-733 
Used for :
- Firefighting,
- Heating and Cooling systems
- Water supply,
- Irrigation 
- Industry and the naval and mining sectors.
Various types of mechanical or soft shaft seals and wear rings are available, depending on the required application. The pump can also be supplied coupled to a diesel engine.

Materials : Cast iron, Ductile iron, Stainless Steel and Bronze.

MAXIMUM FLOW RATE : 675 m3/h
MAXIMUM HEAD            : 129 M
MAXIMUM POWER         : 90 kW     

SUPPLIER Fawde Diesel Engine Fire Pump

Fawde Diesel Engine Fire Pump

 Fawde Diesel Engine Fire Pump

Fawde :

 Engine model : 4DX21-81GG2

Kapasitas : 54 kw

Rpm : 2900

 Engine model : 4DX23-120GG2 (Turbo Intercooler)

Kapasitas : 78 kw

Rpm : 2900

 Engine model : CA6110/125-15GG2

Kapasitas : 98 kw

Rpm : 2900

Engine model : CA6110/125-17GG2

Kapasitas : 114 kw

Rpm : 2900

Silahkan hubungi marketing kami untuk info dan penawaran harga :

SUPPLIER CORKEN PUMP ( POMPA CORKEN )

CORKEN PUMP ( POMPA CORKEN )

Vane Pumps PZ-Series Sliding Pump
Merk : CORKEN

Petroleum Pumps For Refined Petroleum Products And Industrial Solvents.
Applications :
Designed For Applications That Involve Refined Petroleum Products And Industrial Solvents

PZ10 Performance Chart :
 Pump Speed : 420 - 800 Rpm
 Nominal Flow Rate : 85 - 152 Gpm ( 321 - 575 Lpm )
 Maximum Differential Pressure : 125 Psi (8.6 Bar)
Temperatur Range : Up to 300F (149C)
 Maximum Working pressure : 200 Psi (13.8 Bar)
 Brake HP Required : 3.0 - 10.3 bhp ( 2.2 - 7.7 kW )
 Torque Required : 450 - 811 in.lbs ( 50.9 - 91.7 N.m )
 Fluid ; For Refined Petroleum Products And Industrial Solvents.

Fitur Vane Pump Corken :
 Self-Adjusting Sliding Vanes Memaksimalkan Kinerja Pemompaan
Melepaskan Kepala Pompa Memberikan Akses Penuh ke Internal Tanpa Mengganggu Pemipaan
Dapat Menangani Sejumlah Kecil Uap
Daya Hisap Yang Sangat Baik Sangat Bagus Untuk Membersihkan Saluran Hisap Dan Pembuangan
 Dilengkapi Dengan Katup Bantuan Internal Atau Katup Udara Terbuka Opsional (AOV) Untuk Kontrol Aliran Tinggi Dan Rendah
Katup Pelepas Internal Stainless Steel Memastikan Masa Pakai Yang Lama
Katup Bantuan Internal Yang Dapat Disesuaikan

Ket : Kondisi barang Asli 100% siap pakai, Garansi 1 Tahun (Service Only).

SUPPLIER POMPA TORISHIMA MHG-MHB

POMPA TORISHIMA MHG-MHB

Torishima MHG - Horizontal Multistage Section Pump

Description

The TORISHIMA MHG is a horizontal multistage ring section pump specifically designed for high pressure services
such as power stations, incineration plants and HRSG in steel and nonferrous mill.
The simplified construction allows easy maintenance and quick overhaul, and no warming through is required for MHG.
Mechanical seals are equipped as standard and, blind stage and interstage tapping can be fitted as option for customized requirement.
The optimum pump design ensures total reliability and highly cost-effective solutions.

Technical Data

Total Head

up to 4,200m / 13,800ft

Capacity

up to 1,400m³/h / 6,100USgpm

Temperature

up to 200°C / 392°F

Pressure

up to 42MPa / 6,090psi

Size

50 to 125mm

SUPPLIER GEAR PUMP KUNDEA

SUPPLIER SIGMA GEAR PUMP ZPG

MATERIAL : Casing, cover, stuffing box terbuat dari cast iron, roda gigi dan as terbuat dari carbon steel, bearing bushing terbuat dari carbon steel dengan dibungkus bronze.

Jenis : Gear Pump

Merk : Sigma

Aplikasi : Untuk transfer likuid yang kental ( solar, oli, residu, dll )

Buatan : Czech Republic

Size : 1 1/4 ~ 4 inch

Tekanan : Max. 6 bar

Kapasitas : Max. 1.000 liter / menit ( 4 inch )

Kekentalan : Max. 760 mm2 / detik

SUPPLIER POMPA MODEL SKD

SAER PUMP ITALY : Model SKD

MODEL : SKD – HIGH FLOW RATE SPLIT CASING PUMPS
BRANDS : SAER PUMP EX ITALY

One of the few examples of this type of product designed and produced in Italy, as proven by the short delivery times. High efficiency and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various types of mechanical and soft shaft seals (standard).
Applications : Dams, Municipalities, Power Plants, Mining, Irrigation, Water Supply Whenever High Flow rates are required.

Materials : Cast iron, Bronze.

MAXIMUM FLOW RATE  : 5000  m3/h
MAXIMUM HEAD             : 280 M
MAXIMUM POWER          : 1200 kW

SUPPLIER POMPA MILANO

STAINLES  STEEL  CENTRIFUGAL  PUMP :

MERK                                       : MILANO

BRAND                                    : ITALY

TYPE                                        : 80X50-200-XLH

CAPACITY                               : 50 m3/ h

HEAD                                       : 50 m

DISCH. PRESSURE                 : 5 Kg/ Cm2

MATERIAL                              : STAINLES STEEL 316

                      

ELECTRO  MOTOR                 :

TEGANGAN    : 380 V, 3 PHASE

FREQUENSI   : 50 HZ

DAYA               : 11 KW/ 15 HP

PUTARAN       : 2900 Rpm

COMPLITE DENGAN COUPLING DAN BASE PLATE

                      

CENTRIFUGAL  PUMP :

Merk         : Milano

Type         : 125x100-200

Cap.         : 250-300 m3/ h

Head         : 20-40 m

Sealling     : Mechanical Seal

Power       : 75 KW/ 2 Pole/ 50 Hz/ 380 V/ 3000 Rpm    

Description Material     : All Stainles Steel

CENTRIFUGAL  STEINLESS STEEL PUMP :

Merk                : MILANO

Type                : 65 X 40 - 250

Cap.                 : 12 M3 / h

Head                : 20 M

Mech. Seal      : Viton

Liquid              : Etanol

Power              : 5.5 KW/ 380 V/ 50 HZ / 3 Phase / 1500 

SUPPLIER POMPA CALPEDA

CALPEDA PUMP ( POMPA CALPEDA )

CALPEDA SUBMERSIBLE DEEPWELL  PUMP   :

Merk : CALPEDA

Type : 4 SD 15/23 N

Cap. Min : 200 l/m or 12 m3/h

Head : 100 m

Power  : 5,5 KW/ 7,5 Hp

Motor  : 380 V/ 50 Hz 

Price : Rp 27.000.000,-/Unit C/W

100 M FLEXIBLE CABLE WATER RESISTENT 4X6 MM ( KABEL GEPENG ).

WATER LEVEL SWITCH FOR CALPEDA DEEP WELL MERK OMRON

Delivery  : Indent 8 Weeks

CALPEDA SUBMERSIBLE DEEPWELL  PUMP   :

Merk : CALPEDA

Type : 4 SD 15/23 N

Cap. Min    : 200 l/m or 12 m3/h

Head : 100 m

Power  : 5,5 KW/ 7,5 Hp

Motor  : 380 V/ 50 Hz 

Price: Rp 27.000.000,-/Unit C/W motor

WATER   PUMP   :

Merk : CALPEDA

Type : NM 40/ 16 AE

Suction  : 2,5”

Discharge  : 1,5”

Power  : 5,5 PK/ 380 V/ 50 HZ/ 3000 Rpm  

HOT  OIL  PUMP  :

Merk : CALPEDA

Type : T 100

Cap.  : 3 m3/ h

Head : 41 m

Power  : 3 KW/ 4 HP/ 380 V/ 50 HZ/ 2 Pole/ 2950 Rpm

Price : Rp 7.700.000,- / Unit C/W Motor

SPRAY  WATER   PUMP   :

Merk  : CALPEDA

Type : NM 40/ 16 AE

Suction   : 2,5”

Discharge  : 1,5”

Power  : 5,5 PK/ 380 V/ 50 HZ/ 3000 Rpm

Price : Rp 10.700.000,- /Unit C/W Motor, Nosel

WATER   PUMP   :

Merk  : CALPEDA

Type : NM 40/ 16 AE

Suction   : 2,5”

Discharge  : 1,5”

Power  : 5,5 PK/ 380 V/ 50 HZ/ 3000 Rpm

Price : Rp 10.700.000,- /Unit C/W Motor, Nosel

CALPEDA SUBMERSIBLE DEEPWELL  PUMP   :

Merk : CALPEDA

Type : 4 SD 15/23 N

Cap. Min    : 200 l/m or 12 m3/h

Head : 100 m

Power  : 5,5 KW/ 7,5 Hp

Motor  : 380 V/ 50 Hz 

Price : Rp 27.500.000,-/Unit C/W

100 M FLEXIBLE CABLE WATER RESISTENT 4X6 MM ( KABEL GEPENG ).

Term and Conditions:

Delivery  : Indent 4 Weeks

PENGADAAN  SUBMERSIBLE  DEEP  WELL  PUMP   :

Merk   : CALPEDA

Type   : 6 SDN 12/14

Cap.   : 150 Ltr/ m

Head   : 120 m

Power : 5,5 KW/ 7,5 HP/ 380 V/ 3 Phase/ 50 Hz/ 2900 Rpm

Price   : Rp 34.850.000,-/ Unit C/W Motor, 100 M FLEXIBLE CABLE WATER RESISTENT ( KABEL GEPENG )

PENGEBORAN ( DALAM 120 M ) DAN PEMASANGAN CASING PIPE

Price :  Rp 27.000.000,-

BIAYA ANALISA AIR DAN LOGGING  ( DETEKSI AIR ), DAN PEMBERSIHAN :

Price :  Rp 3.500.000,-

PIPE  GALVANIZE DIAMETER 6” ( 30 BATANG )  INCLUDE SAMBUNGAN :

Price : Rp 87.300.000,-

PIPE OUTLET  GALVANIS DIAMETER 2,5” ( 20 BATANG ) INCLUDE ELBOW   :

Price : Rp 17.700.000,-

PANEL BOX C/W AUTOMATIC LEVEL SWITCH FOR CALPEDA DEEP WELL, KABEL ELECTRODA, CLAMP, LEM, SOK DRAT, REPET, DOP, WATER MUR, ETC  :

Price : Rp 20.000.000,-/ Set

PENGECORAN SISI KANAN 2” DAN KIRI 2” SEDALAM 40 M:

Price : Rp 8.000.000,-

FULL BT. SCRINNING ( TANPA BATU KORAL ) DAN SARINGAN SEBANYAK 6 PCS UKURAN 8”   :

Price : Rp 5.000.000,-

PENGADAAN  SUBMERSIBLE  DEEP  WELL  PUMP   :

Merk   : CALPEDA

Type   : 6 SD 8 A/11

Cap.   : 350 Ltr/ m

Head   : 120 m

Power : 15 KW/ 20 HP/ 380 V/ 3 Phase/ 50 Hz/ 2900 Rpm

Price   : Rp 41.000.000,-/ Unit C/W Motor, 100 M FLEXIBLE CABLE WATER RESISTENT ( KABEL GEPENG )

PENGEBORAN ( DALAM 120 M )   :

Price :  Rp 27.000.000,-

PIPE  RUCIKA DIAMETER 6” ( 30 BATANG )  INCLUDE SAMBUNGAN : Price : Rp 28.500.000,-

PIPE OUTLET  GALVANIS DIAMETER 2,5” ( 20 BATANG ) INCLUDE ELBOW   :Price   : Rp 17.700.000,-

PANEL BOX C/W AUTOMATIC LEVEL SWITCH FOR CALPEDA DEEP WELL, KABEL ELECTRODA, SARINGAN, CLAMP, LEM, SOK DRAT, REPET, DOP, WATER MUR, BT. SKREENING, ETC  :

Price : Rp 25.000.000,-/ Set

PENGECORAN SISI KANAN DAN KIRI SEDALAM 35-40 M   :

Price : Rp 8.000.000,-

PENGADAAN  SUBMERSIBLE  DEEP  WELL  PUMP   :

Merk   : CALPEDA

Type   : 6 SD 8 A/11

Cap.   : 350 Ltr/ m

Head   : 120 m

Power : 15 KW/ 20 HP/ 380 V/ 3 Phase/ 50 Hz/ 2900 Rpm

Price   : Rp 41.000.000,-/ Unit C/W Motor, 100 M FLEXIBLE CABLE WATER RESISTENT ( KABEL GEPENG )

PENGEBORAN ( DALAM 120 M )   :

Price :  Rp 27.000.000,-

PANEL BOX C/W AUTOMATIC LEVEL SWITCH FOR CALPEDA DEEP WELL :

Price : Rp 3.500.000,-/ Set

PIPE, ELECTRODE, BT. SCRINING, CLAMP, DROP, REPED, ETC:

Price : Rp 38.500.000,-

SPARE  PART   PUMP ( MECHANICAL  SEAL )   :

Merk : CALPEDA

Type : CA- PA 55 HP-4KW

Price : Rp 550.000,- /Unit

Untuk Penawaran Tipe Lainnya Silahkan Hubungi Kami